Zoom (July 20)    Zoom (July 21)    Zoom (July 22)

Go to Focus session : Real-Time Streaming

| [A] Smart Design and Materials

Time Paper No. Title Authors Abstract
08:30-09:00 (30’)
FA1
Automated Design & Data Science Approaches for Scaled-up Additive Manufacturing
Prof. Seung-Kyum Choi (Georgia Institute of Technology, USA)
09:00-09:30 (30’)
FA2
Design of Human Oriented Mechanisms based on the Fusion of Tactile and Visual Sensation
Prof. Daisuke Matsuura (Tokyo Institute of Technology, Japan)
09:30-09:50 (20’)
FA3
Advances in AFM-based Characterization Techniques for Piezoelectric Materials
Prof. Kwanlae Kim (Seoul National University of Science & Technology, Korea)
09:50-10:10 (20’)
FA4
Synergy Effect through Convergence of Classical Mechanics and State-of-the-art Triboelectric Signal Generation Mechanism
Prof. Dongwhi Choi (Kyung Hee University, Korea)
10:10-10:30 (20’)
FA5
Investigating Cryogenic Deformation Behaviour for Developing Nanocrystalline Titanium via Cryo-forging
Prof. Tea-Sung Jun (Incheon National University, Korea)
10:30-10:50 (20’)
FA6
Thermophysical Properties of Eco-friendly Inorganic MnCl2·4H2O Phase Change Materials
Dr. Kyung-Eun Min (Portland State University, USA)

| [B] Advanced Technology in Machine Tools & Machining

Time Paper No. Title Authors Abstract
13:50-14:20 (30’)
FB1
Smart Additive Manufacturing
Prof. Chinedum E. Okwudire(University of Michigan, USA)
14:20-14:50 (30’)
FB2
Energy-efficient Machine Tools and Technologies
M. Eng. Sebastian Kaiser (Institute of Production Engineering and Machine Tools (IFW), Leibniz University Hannover, Germany)
14:50-15:20 (30’)
FB3
A Machining Digital Twin for Hybrid Manufacturing
Prof. Tony Schumitz (University of Tennessee, USA)
15:40-16:00 (20’)
FB4
Studying Crack Generation Mechanism of Single crystal Sapphire during Ultra-precision Machining by MD Simulation-based Slip/fracture Activation Model
Prof. Sangkee Min (University of Wisconsin-Madison, USA)
16:00-16:20 (20’)
FB5
Molecular Dynamics Simulation of Ultra-precision Machining of Sapphire
Prof. Woo Kyun Kim (University of Cincinnati, USA)
16:20-16:40 (20’)
FB6
Performance Evaluation of Multi-axis Feed Systems Using a CAE Based Dynamic Digital Twin
Dr. Chang-Ju Kim (Korea Institute of Machinery & Materials, Korea)
16:40-17:00 (20’)
FB7
Machinability Diagnosis Technique in Machining Process
Dr. Kyung-Hee Park (Korea Institute of Industrial Technology, Korea)

| [C] Advances in Additive Manufacturing

Time Paper No. Title Authors Abstract
17:10-17:40 (30’)
FC1
A Data-driven Design Framework for 3D Printed Lattice Structure Optimization and Implementation
Prof. Seung Ki Moon (Nanyang Technological University, Singapore)
17:40-18:10 (30’)
FC2
Nanoparticle Additives for Shape Memory Materials and Energy Devices
Prof. Pei-Chen Su (Nanyang Technological University, Singapore)
18:10-18:30 (20’)
FC3
Single-digit-micron-resolution Continuous Liquid Interface Production (CLIP) 3D Print Technology
Prof. Brian Lee (Sungkyunkwan University, Korea)
18:30-18:50 (20’)
FC4
A Design Trade-off Method for the Additive Manufacturing Process Chain
Prof. David Rosen (Georgia Institute of Technology, USA)

| [D] Nano/Microtechnologies for Next Industries

Time Paper No. Title Authors Abstract
08:30-09:00 (30’)
FD1
Advance Green Manufacturing Technology for Printed Circuits Board Industry by Fully Additive Process
Dr. Ta-Hsin Chou Industrial Technology Research Institute (ITRI), Taiwan)
09:00-09:30 (30’)
FD2
Microneedle Sensor Technologies for Improved Healthcare: Progress & Challenges
Prof. Kazuyoshi Tsuchiya (Tokai University, Japan)
09:30-09:50 (20’)
FD3
A Novel Piezo-controlled Needle-free Injection System for Precise Delivery of Functional Fluids
Dr. Mojiz Abbas Trimzi (NASEM Co., Ltd., Korea)
09:50-10:10 (20’)
FD4
Recent Developments in Manufacturing Tribology
Prof. Steven Schmid (University of North Carolina at Charlotte, USA)
10:10-10:30 (20’)
FD5
Self-assembled Smart Scaffold for Endovascular Disease Diagnosis
Dr. Dong-Su Kim (Chonnam National University, Korea)
10:30-10:50 (20’)
FD6
Experimental Study on the Magnetic and Mechanical Properties of Laser Selective Melted FeSiCr Soft Magnetic Composite
Prof. Chunhui Chung (National Cheng Kung University, Taiwan)

| [E] Hot Issues on Precision Metrology

Time Paper No. Title Authors Abstract
13:50-14:20 (30’)
FE1
Optical Metrology for Extremely Large Space Telescopes beyond James Webb Space Telescope
Prof. Daewook Kim (University of Arizona, USA)
14:20-14:40 (20’)
FE2
Optical Method for Simultaneous Measurement of Individual Layer Thicknesses in Thin-film Deposited Samples
Dr. Jungjae Park (Korea Research Institute of Standards & Science, Korea)
14:40-15:00 (20’)
FE3
On-machine Surface Profiling of Precision Lens Molds Using a Radial Shearing Interferometer
Prof. Joo Hyung Lee (Seoul National University of Science & Technology, Korea)
15:00-15:20 (20’)
FE4
All Fiber Distance Measurement System towards On-chip LiDAR Engine
Dr. Yoon-Soo Jang (Korea Research Institute of Standards & Science, Korea)
15:20-15:40 (20’)
FE5
Ultrathin Insect-eye Camera for High-contrast Visible and Near-infrared Imaging
Dr. Kisoo Kim (Korea Photonics Technology Institute, Korea)

| [F] Korea-Germany Intelligent Manufacturing System

Time Paper No. Title Authors Abstract
16:00-16:30 (30’)
FF1
Digital Twins for Sustainable Manufacturing
Prof. Matthias Brockmann (University of Applied Sciences FH Münster, Germany)
16:30-16:50 (20’)
FF2
Towards Nanostructures -Potentials of Artificial Intelligence for Large Area Diamond Turning of Micro- and Nanostructures
Mr. Maximilian Kosel (Fraunhofer Institute for Production Technology, Germany)
16:50-17:10 (20’)
FF3
Future Perspectives towards Faster Development of Active Assembly Solutions for Next Generation of Industrial Applications
Mr. Daniel Zontar (Fraunhofer Institute for Production Technology, Germany)
17:10-17:30 (20’)
FF4
Stochastic Physics-based Model Updating Using Lamb Waves for Fatigue Crack Detection in Riveted Lap Joints
Prof. Wongon Kim (Seoul National University, Korea)
17:30-17:50 (20’)
FF5
NO2 Gas Monitoring in Factory Using Low Power Consumption Gas Sensing System based on Colorimetric Gas Sensor
Dr. Young-Gyun Kim (Seoul National University, Korea)

| [G] Robotic Machining and Next Generation Manufacturing

Time Paper No. Title Authors Abstract
08:30-09:00 (30’)
FG1
Discontinuity Formation and Detection during Friction Stir Welding of Aluminum Alloys
Prof. Frank Pfefferkorn (University of Wisconsin-Madison, USA)
09:00-09:20 (20’)
FG2
Deflection Compensation of Robotic Milling with Cutting Force Estimation and Identification Error Reduction
Prof. Jihyun Lee (University of Calgary, Canada)
09:20-09:40 (20’)
FG3
Cutting Force, Temperature, Tool Wear and Machined Surface Alteration in Micro-milling of Laser-melting Ti-6Al-4V / Ti Composites
Prof. Chunliang Kuo (National Taiwan University of Science & Technology, Taiwan)
09:40-10:00 (20’)
FG4
Pre-compensation of Hole Positioning Error in Robotic Drilling Process
Dr. Seong Hyeon Kim (Korea Institute of Industrial Technology, Korea)
10:00-10:20 (20’)
FG5
On Developing Core Technologies of Serial-structure Flexible Machine for Metal Cutting Applications
Dr. Jongyoup Shim (Korea Institute of Machinery & Materials, Korea)
10:20-10:40 (20’)
FG6
On-machine, In-process Strobo-stereoscopy for Spatially Resolved 3D Surface Profiling of Rotating Part
Prof. Chabum Lee (Texas A&M University, USA)
10:40-11:00 (20’)
FG7
Effect of Fiber-tool Contact Mode on Carbon Fiber Reinforced Plastic Milling Tool Wear
Dr. Gyuho Kim (Yonsei University, Kore)

| [H] Digital Twin for Smart Manufacturing

Time Paper No. Title Authors Abstract
13:50-14:20 (30’)
FH1
Augmented Reality in Human Cyber-Physical Systems toward Intelligent Manufacturing
Prof. Chih-Hsing Chu (National Tsing Hua University, Taiwan)
14:20-14:40 (20’)
FH2
Industrial Digital Twin for Smart Manufacturing: A Case Study on Robotic Welding System
Prof. Sang Won Lee (Sungkyunkwan University, Korea)
14:40-15:00 (20’)
FH3
Digital Twin Based Process Monitoring Framework and AI-powered Process Planning
Prof. Martin B.-G. Jun (Purdue University, USA)
15:00-15:20 (20’)
FH4
Parameter Optimization and Cycle Time Estimation Using CNC Machine Tool Simulation
Dr. Chan-Young Lee (Korea Institute of Machinery & Materials, Korea)
15:20-15:40 (20’)
FH5
The Tool Life Simulation based on a Digital Twin Model in the Milling Process
Dr. Dongmin Kim (Korea Institute of Industrial Technology, Korea











PRESM2022 Secretariat
*Abstract/Program: conf@kspe.or.kr
*Accounting: account@kspe.or.kr
*General : kspe@kspe.or.kr
FAX: 82-2-518-2937
The Korean Society for Precision Engineering, SKY1004 bldg. 12F, 50-1 Junglim-ro, Jung-gu, Seoul, 04508, Korea (President: Seung-Han Yang )
프로그램, 논문담당: conf@kspe.or.kr
회계, 결제담당: account@kspe.or.kr
총괄, 사무국장 : kspe@kspe.or.kr
FAX: 02-518-2937
(사)한국정밀공학회, (04508) 서울시 중구 중림로 50-1, 12층(SKY1004빌딩), 고유번호 211-82-12117 (대표자 양승한)